Vinyl Sticker Prints on Acrylic Door Signage

Daniel Studzinski, from First Sensor Singapore, approached us with the intention of replacing their existing office’s main door signage.

He gave us a few small PNG and JPG snapshots of their original logo and a copy of it on his namecard for us to work with.

First we retraced the logo into Adobe Illustrator manually and worked closely with Daniel to refine the edges and curves until it was perfect.

Before we began production, we finalised that the signage is to be made of 5mm Clear Acrylics, and the prints to be reverse mounted.

During setup, we painstakingly scraped off the maxbond glue remains of the previous signage, and then using double-sided foam tape, we mounted the signage onto the door.

The end result: A perfect company signage protected with a 5 mm smooth and clear acrylic finish.

Job Specifications:

• Signage Dimensions: 92cm W x 76.5cm H
• Printing: Eco-Solvent
• Media: Oracal 3651 Clear Vinyl
• Overlaminate: White vinyl
• Finishing: Reverse mount onto 5mm Clear Acrylic
• Setup/Installation: Direct mount onto Main entrance Door
• Image: Adobe Illustrator EPS, CMYK
• Budget Estimates: $300/++